Starter switch positions – Mercedes-Benz SL-Class 2006 Owners Manual User Manual

Page 37

Advertising
background image

36

Getting started

Unlocking

Starter switch positions

SmartKey

Starter switch

0 For removing SmartKey
1 Power supply for some electrical con-

sumers, such as seat adjustment

2 Ignition (power supply for all electrical

consumers) and driving position
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.

If a lamp in the instrument cluster re-
mains on after starting the engine or
comes on while driving, refer to “Lamps
in the instrument cluster”
(

page 332).

3 Starting position

Warning!

G

When leaving the vehicle, always remove the

SmartKey or the SmartKey with

KEYLESS-GO* from the starter switch, take

it with you, and lock the vehicle. Do not

leave children unattended in the vehicle, or

with access to an unlocked vehicle. Unsu-

pervised use of vehicle equipment may

cause an accident and/or serious personal

injury.

i

When you switch on the ignition, the in-
dicator and warning lamps (except high
beam headlamp indicator lamp and
turn signal indicator lamps unless acti-
vated) in the instrument cluster come
on. The indicator and warning lamps
(except high beam headlamp indicator
lamp and turn signal indicator lamps if
activated) should go out when the en-
gine is running. This indicates that the
respective systems are operational.

i

The SmartKey can only be removed
from the starter switch with the gear
selector lever in position P.

Advertising