See “factory setting, On, see “factory setting – Mercedes-Benz E-Class 2006 Owners Manual User Manual

Page 109

Advertising
background image

108

Controls in detail

Locking and unlocking

Factory setting

Global unlocking

̈

Press button

Œ.

ț

All turn signal lamps flash once.

ț

An acoustic signal sounds once
(if equipped and feature activated).

ț

The locking knobs in the doors
move up.

ț

The anti-theft alarm system is dis-
armed.

The vehicle will lock again automatically
and reactivate the anti-theft alarm system
within approximately 40 seconds of un-
locking if:

ț

neither a door nor the trunk is opened

ț

the SmartKey is not inserted in the
starter switch

ț

the central locking switch is not acti-
vated

Global locking

̈

Press button

‹.

ț

All turn signal lamps flash three
times.

ț

An acoustic signal sounds three
times (if equipped and feature acti-
vated).

ț

The locking knobs in the doors
move down.

ț

The anti-theft alarm system is
armed.

Selective setting

If you frequently travel alone, you may wish
to reprogram the SmartKey so that
pressing

Œ only unlocks the driver’s

door and the fuel filler flap.

̈

Press and hold buttons

Œ and ‹

simultaneously for about 5 seconds un-
til battery check lamp

5 (

page 106)

flashes twice.

The SmartKey will then function as fol-
lows:

i

You can also open and close the power
windows and tilt/sliding sunroof* or
tilt/sliding panel* using the SmartKey
(

page 234).

i

Your vehicle may be equipped with an
acoustic lock and unlock confirmation
signal feature. If your vehicle is
equipped with this feature and the fea-
ture is activated, an acoustic signal will
sound when the vehicle is locked or un-
locked using the SmartKey.

To determine whether or not your vehi-
cle is equipped with this feature, con-
tact an authorized Mercedes-Benz
Center. If equipped and you wish to ac-
tivate or deactivate the feature, or ad-
just its signal volume, also contact an
authorized Mercedes-Benz Center.

Advertising