Mercedes-Benz E-Class 2006 Owners Manual User Manual
Page 39
38
Getting started
Unlocking
KEYLESS-GO start/stop button
1 USA only
2 Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
̈
Make sure the gear selector lever is set
to P.
̈
Do not depress the brake pedal.
Position 0
Before you press the KEYLESS-GO start/
stop button, the vehicle’s on-board elec-
tronics have status 0 (as with SmartKey re-
moved).
Position 1
̈
Press KEYLESS-GO start/stop button
once.
This supplies power for some electrical
consumers, such as seat adjustment.
Ignition (or position 2)
̈
Press KEYLESS-GO start/stop button
twice.
This supplies power for all electrical
consumers. All lamps in the instrument
cluster (except low beam headlamp in-
dicator lamp, high beam headlamp indi-
cator lamp, and turn signal indicator
lamps unless activated) come on. If a
lamp in the instrument cluster fails to
come on when the ignition is switched
on, have it checked and replaced if nec-
essary. If a lamp in the instrument clus-
ter remains on after starting the engine
or comes on while driving, see “Lamps
in instrument cluster” (
i
If you now press the KEYLESS-GO
start/stop button
ț
once again, the ignition (position 2)
is switched on.
ț
twice, the power supply is again
switched off.
i
If you now press the KEYLESS-GO
start/stop button once, the power sup-
ply is again switched off.