Mercedes-Benz E-Class 2006 Owners Manual User Manual
Page 192
191
Controls in detail
Automatic transmission
Steering wheel gearshift control
one-touch gearshifting E 55 AMG
The steering wheel gearshift control pro-
vides an alternative method for changing
the gears manually and limiting or extend-
ing the gear range for automatic shifting
with the gear selector lever in position D
and driving in the automatic program
mode C or S.
The steering wheel gearshift buttons are
located to the left and right of the steering
wheel.
1 Left button: downshift
2 Right button: upshift
i
For information on using the steering
wheel gearshift control in manual pro-
gram mode M (E 55 AMG only), see
“Manual shift program” (
i
To avoid overrevving the engine when
downshifting with steering wheel
gearshift buttons, the transmission will
not shift to a lower gear if the engine’s
max. speed would be exceeded.
!
Allow engine to warm up under low
load use. Do not place full load on the
engine until the operating temperature
has been reached.
Shift into reverse gear R or parking
position P only when the vehicle is
stopped.
Avoid spinning of a drive wheel for an
extended period when driving off on
slippery road surfaces. This may cause
serious damage to the drivetrain which
is not covered by the Mercedes-Benz
Limited Warranty.
i
You cannot shift with the steering
wheel gearshift buttons when the gear
selector lever is in position P, N or R.
The last selected program
mode (C or S) is switched on when the
engine is restarted in the automatic
program mode.