Mercedes-Benz E-Class 2006 Owners Manual - Manual (Page 438)

437
Practical hints
Replacing bulbs
High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
̈ Turn bulb socket 2 with the bulb
counterclockwise and remove it.
̈ Pull the bulb out of bulb socket 2.
̈ Press the new bulb gently into bulb
socket
2.
̈ Place bulb socket 2 back into the
lamp and turn it clockwise until it en-
gages.
Front turn signal lamp bulb
̈ Turn bulb socket 5 with the bulb
counterclockwise and remove it.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket
5.
̈ Press the new bulb gently into bulb
socket
5 and turn clockwise until it
engages.
̈ Place bulb socket 5 back into the
lamp and turn it clockwise until it en-
gages.
Parking and standing lamp bulb
̈ Turn bulb socket 3 with the bulb
counterclockwise and remove it.
̈ Pull the bulb out of bulb socket 3.
̈ Press the new bulb gently into bulb
socket
3.
̈ Place bulb socket 3 back into the
lamp and turn clockwise until it engag-
es.
Additional turn signal lamp bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Center.
Front side marker lamp bulbs
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.