Mercedes-Benz E-Class 2006 Owners Manual - Manual (Page 36)

35
Getting started
Unlocking
̈ Get in the vehicle and insert the
SmartKey in the starter switch.
For more information, see “Locking and
unlocking” (
୴ page 106).
Unlocking with KEYLESS-GO*
With the KEYLESS-GO function, you can
lock and unlock the vehicle without using
the remote control buttons on the
SmartKey and start the engine without in-
serting the SmartKey in the starter switch.
̈ Pull an outside door handle.
ț All turn signal lamps flash once.
ț An acoustic signal sounds once
(if equipped and feature activated).
For more information, see “Factory
setting” (
୴ page 114).
ț The locking knobs in the doors
move up.
ț The anti-theft alarm system is dis-
armed.
̈ Get in the vehicle.
For more information, see “SmartKey with
KEYLESS-GO*” (
୴ page 111).
i
The electrohydraulic brake system is
activated (
୴ page 97).
i
To unlock the vehicle, the SmartKey
with KEYLESS-GO must be outside the
vehicle, no further than approximately
3 feet (1 meter) away from the door.
Warning!
G
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you, and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle equipment may cause an accident
and/or serious personal injury.
i
The electrohydraulic brake system is
activated (
୴ page 97).