QOMO QRF900 User Manual User Manual
Page 112
Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com
112
Pressing the
“Return” Right Soft Key
reverts to the menu one level up.
Press the Menu/ok Key
to select the answer, and press
“OK” Left Soft Key
to
save the question setting.
3.2.2.4.3
Connecting the instructor’s keypad to the host receiver:
To connect the instructor keypad to the host receiver, follow these steps:
(1)
Login to a class
:
To login to a class, follow these steps:
Under the NoHost screen, select
“Login” Right Soft Key
to login to your nearby class.
OR
1. Under the NoHost screen, press the
“Menu/OK” Key
to enter the main menu.
2. Select item
“Login” to login into your class.
(2) Set Channel:
If the clicker does not automatically detect the right class you would like to attend, you may manually
set your clicker communication channel to the channel number that the class use. The class channel
number is the main receiver channel number set.
Note: The main receiver channel can be set in the software. Refer to the software channel session.
To set the instructor clicker channel, follow these steps:
1. Under the NoHost screen, press the Menu/OK Key
to enter into the main menu.
2.
Select “2.SetChannel” submenu.
Under the “SetChannel” screen, enter a valid channel number.
(3) Login to the last same channel class: