QOMO QRF900 User Manual User Manual
Page 125
Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com
125
3.2.2.5.3 Upload sessions
To upload the session data, follow these steps: (You must have at least one stored session to be
uploaded)
Note: The main receiver and a PC are needed for uploading the session data
1. Plug the main receiver into a PC.
2. Set the QClick software to the Receiving Session Data mode. Refer to Part 2 Software,
2.4.2 Receive Session for detailed instruction.
3. Select the Offsite mode in the instructor keypad. Then select the function UploadSession.
4. The LCD screen will display a list of available sessions.
5. Select the desired session and press the Menu/ok Key
.
6. The LCD will display the selected information. Click the Menu/ok Key
to confirm or click
“Return” Right Soft Key
to quit uploading. After successfully uploading, the session
data will not be purged. To purge the session data, go to the function Session List.
3.2.2.5.4 Class List:
The Class List function provides the list of classes which have been downloaded into the instructor
keypad as well as the selection of classes you desire to delete from the keypad memory in order to