QOMO QRF900 User Manual User Manual
Page 118
Copyright © 2008 -2010 All Rights Reserved by QOMO HiteVision.
www.qomo.com
118
Note: No main receiver or a PC is needed for conducting a session in this mode.
1. Select the Offsite mode in the instructor keypad.
2. Select the function Begin Session. If the keypad has reached maximum storage, you must
purge some of the existing data. Refer to session 3.2.2.5.6 Session List for detailed
instructions.
Note: Before purging data, make sure you have uploaded the session into the QClick database
system. Otherwise, the session data will not be recovered after the purging.
The LCD screen will display a list of classes previously loaded.
3. Move the highlight using Up
/Down Key
to the class area and then select the
desired class by pressing the Menu/ok Key
. If there are no classes loaded in the keypad,
the s
creen will display “
NoClasslist!
”.
Once you have successfully selected a class, choose an activity mode from the list displayed on the
LCD screen.
4. Move the highlight using Up
/Down Key
to the ExamList area and then select
the desired exam by pressing the Menu/ok Key
. If there is no exam loaded in the
keypad, the ExamList area is blank. If you choose one of the Free Style activities, which
include FreeNormal, FreeRush and FreeEliminate, you will not need to load an exam prior
to conducting the quiz. However, if you choose one of the No Free Style activities, then you
must load an exam. If no exams are downloaded into
the instructor‟s keypad, then after
beginning a session,
the LCD screen will display this message “
NoExamList
”