Rice Lake 120 Digital Weight Indicator - Manual (Page 18)

14 120 Installation Manual
3.2.3 Calibration Menu
See Section 4.0 on page 21 for calibration procedures.
WZERO
*CAL*
Display and edit
zero calibration
A/D count value
Display and edit
test weight value
WVAL
*CAL*
Display and edit
span calibration
A/D count value
WSPAN
* CAL*
Press Enter to
remove offset from
zero and span
calibrations
REZERO
VERS DATE TIME PFORMT SERIAL CALIBR CONFIG FORMAT PROGRM
10000
Figure 3-5. Calibration Menu
Table 3-4. Calibration Menu Parameters
CALIBR Menu
Parameter Choices Description
Level 2 submenus
WZERO — Display and edit the zero calibration A/D count value.
DO NOT adjust this value after WSPAN has been set!
WVAL 10000
test_weight Display and edit the test weight value.
WSPAN — Display and edit the span calibration A/D count value.
REZERO — Press Enter to remove an offset value from the zero and span calibrations.
Use this parameter only after WZERO and WSPAN have been set. See Section 4.1 on
page 21 for more information about using this parameter.