Rice Lake RL550 Digital Chair Scale Technical and Operating Instructions - Manual (Page 9)

Rice Lake 550 Digital Chair Scale - Scale Assembly 5
Chair Assembly
Use the following steps to assemble the chair.
1. Use the Allen key provided in the “Parts Inside” box.
2. Release both of the screws holding the back handle frame (which is marked with circles in Figure 3-5).
R e m o v e s c r e w s t o
release the back handle
frame
Figure 3-5. Remove Screws to Release the Back Handle Frame
3. Pull out the back handle frame and rotate it so that the indicator will be facing up.
Figure 3-6. Pull out Frame and Rotate
4. Insert the back frame and secure it with the screws.
Tighten screws once
frame has been rotated
Figure 3-7. Tighten Screws Once Frame Has Been Rotated and Reinserted