Rice Lake SURVIVOR LV Series Livestock Ring Scale - Manual (Page 25)

Configuration 21
Format submenu
SECNDR DECPNT
DSPDIV
UNITS Secondary Units – Specifies the decimal position, display divisions, units, and conversion
multiplier used for the secondary units. See below for submenu parameter descriptions.
Secondary Units submenus
DECPNT 88888.8
888888
888880
8.88888
88.8888
888.888
8888.88 Decimal point location. Determines the location of the decimal point or dummy zero in the
secondary unit display.
DSPDIV 5D
1D
2D Display Divisions – Selects the value of minimum division size of the displayed weight.
UNITS kg
OZ
TN
T
G
lb
NONE Specifies secondary units for displayed and printed weight. Values are: lb = pound;

kg = kilogram; OZ = ounce; TN = short ton; T = metric ton; G = gram
Note
Indicators sold outside North America are configured with kg for both
primary and secondary units.
MULT
0.45359
Enter other
choices via
keyboard
Multiplier – Specifies the conversion factor by which the primary units are multiplied to
obtain the secondary units. The default is 0.45359, which is the conversion factor for
changing pounds to kilograms. See Section 8.5 for a list of multipliers.
To toggle between primary and secondary units, press the UNITS key.
Format submenu
DSPRAT
250MS
500MS
750MS
1500MS
2500MS
1SEC
2SEC
3SEC
4SEC
6SEC
8SEC Display rate. Sets the update rate for displayed values. Values are in milliseconds (MS) or
seconds (SEC).
FORMAT Menu
Parameter Choices Description