Rice Lake SURVIVOR LV Series Livestock Ring Scale - Manual (Page 26)

22 590 AG Indicator Operators Manual
3.2.3 Calibration Menu
See Section 4.0 for calibration procedures.
XXXXXXX XXXXXXX
WZERO
*CAL*
Display and edit
zero calibration
A/D count value
Display and edit
test weight value
WVAL
*CAL*
Display and edit
span calibration
A/D count value
WSPAN
VERS PROGRM PFORMT SERIAL CALIBR CONFIG FORMAT
Press Enter to
remove offset from
zero and span
calibrations
REZERO
*CAL*
Figure 3-6. Calibration Menu
Table 3-2. Calibration Menu Parameters
CALIBR Menu
Parameter Choices Description
WZERO — Calibrate zero, display and edit the zero calibration A/D count value.
WVAL — Display and edit the test weight value.
WSPAN — Calibrate span, display and edit the span calibration A/D count value.
REZERO —
Press Enter to remove an offset value from the zero and span calibrations.
Use this parameter only after WZERO and WSPAN have been set. See Section 4.1 for more
information about using this parameter.