2 setting the system time and date, 52 pm – Rice Lake 920i FlexWeigh Systems - 102 User Manual
Page 12
8
System 102 Automatic Fill, Automatic Discharge Filler
3.2
Setting the System Time and Date
Use the following steps to set up the system time and date.
1. From the main setup menu screen, press the
Time/Date
softkey.
Figure 3-3. Select Time/Date Softkey
2. Use the arrow keys on the 920i and the numeric keypad (see Figure 1-1) to modify the time and or date.
3. Press the
enter
key to save your settings.
Figure 3-4. Time and Date Main Screen
The Cancel softkey can be pressed at any time to exit this sequence without saving any changes.
04/28/2011
02:15PM
SCALE #1
ID #1
More =>
Setup Menu:
- - - - - -
SCALE #1
Gross
Lb
SETUP MENU
Time/Date
Setup
Password
ID #2
Program: Express 102 PN120597 (V 1.00)
ID #1 (disabled)
Start
O Zero Tol
ID #2 (disabled)
Resume
O Fill Copt
Dual Speed (enabled)
Reset
O Slow Fill
Auto Tare (enabled)
Stop
O Fast Fill
Auto Print (disabled)
Discharge O Discharge
Delay After Discharge (sec) :30
Cancel
03:52 PM
04/28/2011
Note