Rice Lake 920i FlexWeigh Systems - 102 - Manual (Page 5)

Safety 1
1.0 Introduction
This manual is intended for use by service technicians and operators responsible for installing and operating the
Flexweigh System 102 Automatic Fill, Automatic Discharge Controller. Additional information on the actual hard-
ware features of the 920i are explained in the 920i Installation and Operation manual (PN 67887) and is included
with this product.
1.1 Safety
Safety Symbol Definitions:
Indicates a potentially hazardous situation that, if not avoided could result in serious injury or death, and
includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
Safety Precautions
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing System dealer for replacement manuals. Proper care is your
responsibility.
General Safety
Failure to heed may result in serious injury of death.
Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be
performed by qualified service personnel only.
DO NOT allow minors (children) or inexperienced persons to operate this unit.
DO NOT operate without all shields and guards in place.
DO NOT step on the unit.
DO NOT jump up and down on the scale.
DO NOT use for purposes other then weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
DO NOT use near water.
Before opening the unit, ensure the power cord is disconnected from the outlet.
Keep hands, feet and loose clothing away from moving parts.
1.2 Overview
The Flexweigh System 102 Automatic Fill, Automatic Discharge Controller is the answer to many of manufac-
turer's most commonly used weighing processes, providing immediate solutions for almost any operation. It offers
user simplicity of one-button operation and will automatically fill your scale to a preset weight. It can discharge the
scale into a container. Remove the container from under the scale and replace it under the scale with another empty
container and repeat the process. It can automatically store, display and transmit each fill weight and ongoing pro-
duction accumulations. Built-in safety interlocks prevent startup of a fill cycle if an empty container is not in place,
or if the previously filled container has not been removed.
WARNING
CAUTION
Important
WARNING