Rice Lake 920i FlexWeigh Systems - 102 - Manual (Page 17)

Entering Presets Softkey Menu 13
4.0 Sequence of Operation
The following instructions explain a basic sequence of operation for the System 102 Automatic Fill, Automatic
Discharge Filler.
4.1 Entering Presets Softkey Menu
Note that the front panel E-stop button must be in the stopped position (pushed in) to enable any of the
following keypad entries:
The System 102 has the capability to allow the operator to modify the presets/weights. Use the following
instructions to do this.
Figure 4-1. Presets Menu Screen
1. Press the Presets softkey. Softkeys in Figure 4-2 are displayed.
2. The following softkeys are available as shown in Figure 4-2.
Figure 4-2. Presets Softkey Parameters
3. Press the corresponding softkey to edit the data. Parameters that can be edited include:
• Target weight
• Dribble weight
• Preact weight
• Zero tolerance weight
Note
- - - - -
Target Dribble Preact Near Zero
Consec. # Subtotal Total
200.0 Lb 75 0.0 10.0
23 1687 Lb 3468 Lb
Presets
Setup
Menu
Totals
4/28/2011 10:20AM SCALE #1
SCALE
#1
Gross
Lb
- - - - -
Target Dribble Preact Near Zero
Consec. # Subtotal Total
200.0 Lb 75 0.0 10.0
23 1687 Lb 3468 Lb
Dribble
Weight
Exit
Target
Weight Preact
Weight Zero Tol
Weight
4/28/2011 10:22AM SCALE #1
SCALE
#1
Gross
Lb