9 test digital i/o – Rice Lake 920i FlexWeigh Systems - 102 User Manual
Page 16
12
System 102 Automatic Fill, Automatic Discharge Filler
3.9
Test Digital I/O
Press the
Test Digital I/O
softkey as shown in Figure 3-10 to test the Fill Complete, Slow Fill and Fast Fill relay
outputs.
Figure 3-12. Test Digital I/O
Fill Complete
Press the
Fill Complete
softkey to test the digital I/O.
Slow Fill
By pressing the
Slow Fill
softkey, the digital I/O is tested and the Slow Fill icon on the setup menu screen is
darkened
while it’s being tested. Press the
Slow Fill
softkey again and the icon clears again.
Fast Fill
By pressing the
Fast Fill
softkey, the digital I/O is tested and the Fast Fill icon on the setup menu screen is darkened
while it’s being tested. Press the
Fast Fill
softkey again and the icon clears again.
04/15/2011
02:15PM
SCALE #1
Fast Fill
Exit
Setup Menu:
- - - - - -
SCALE #1
Gross
Lb
SETUP MENU
Fill
Complete
Slow Fill
Program: Express 102 PN120597 (V 1.00)
ID #1 (disabled)
Start
O Zero Tol
ID #2 (disabled)
Resume
O Fill Copt
Dual Speed (enabled)
Reset
O Slow Fill
Auto Tare (enabled)
Stop
O Fast Fill
Auto Print (disabled)
Discharge O Discharge
Delay After Discharge (sec) :30
Discharge