Rice Lake 920i FlexWeigh Systems - 102 - Manual (Page 20)

16 System 102 Automatic Fill, Automatic Discharge Filler
4.2 Entering Totals Softkey Menu
Note that the front panel E-stop button must be in the stopped position to enable any of the
following keypad entries.
Figure 4-7. Printing and Clearing Accumulators Menu
1. Press the Totals softkey.
2. The operator can print and reset the consecutive number, subtotal and totals by pressing the appropriate
softkey. Parameters that can be edited include:
• Consecutive Number
• Print Sub Total
• Print Total
Consecutive Number
Press the Consecutive Number softkey to enter the next number to be weighed. The system keeps incrementing
every time a batch is running (counter).
Figure 4-8. Enter Consecutive Number
Note
- - - - -
Target Dribble Preact Near Zero
Consec. # Subtotal Total
200.0 Lb 75 0.0 10.0
23 1687 Lb 3468 Lb
Presets
Setup
Menu
Totals
4/28/2011 10:20AM SCALE #1
SCALE
#1
Gross
Lb
- - - - -
Target Dribble Preact Near Zero
Consec. # Subtotal Total
200.0 Lb 75 0.0 10.0
23 1687 Lb 3468 Lb
Home End Cancel
Enter Consecutive Number
Enter Consecutive Number
=> 23
04/28/2011 2:45PM
Gross
Lb
SCALE #1
SCALE
#1