Rice Lake 920i Installation Manual V3.12 - Manual (Page 57)

Configuration 51
3.2.9 VERS Menu
The VERS menu can be used to check the installed software version or, by using the
Reset Config
softkey, to
restore all configuration parameters to their factory default values. There are no parameters associated with the
Version menu: when selected, the indicator displays the installed software version number.
Figure 3-19. Version Menu
The
Contacts
softkey on the Version menu allows display of contact information (see “FEATURE Menu,
CONTACT Submenu” on page 43). If an
iQUBE
scale is configured, a
Diagnostics
softkey also provides access to
iQUBE
diagnostic information.
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O VERS
Software
version