2 using the front panel, Using the front panel, 920i – Rice Lake 920i Installation Manual V4.01 User Manual
Page 72: Figure 6-2. pformt menu
66
920i
Installation Manual
6.4.2
Using the Front Panel
If you have no access to equipment for communication through a serial port or are working at a site where such
equipment cannot be used, you can use the PFORMT menu (see Figure 6-2 on page 66) to customize the print
formats.
SCALES
SERIAL FEATURE PFORMT SETPTS DIG
I/O
VERS
GFMT
NFMT
ACCFMT
SPFMT
TRWIN
TRWOUT
TRFMT
See GFMT Menus
PORT
FMT
format
HDRFMT1
HDRFMT2
format
format
ALERT
Default port for ALERT
format is PORT 1
SERV
Alert email
server
PHONE
Alert modem
phone
ALERT format ONLY
AUDITFMT
PORT
AUXFMT
Same as AUXFMT1
AUXFMT1
AUXFMT20
PORT 1
None
PORT
FMT1
format
...
PORT 3
PORT 2
PORT 4
PORT 1
None
PORT 3
PORT 2
PORT 4
PORT 1
None
PORT 3
PORT 2
PORT 4
Figure 6-2. PFORMT Menu
Each print format can be edited from the front panel using a character selection like that shown in Figure 6-3.
Use the navigation keys (
up
,
down
,
left
,
right
) to move around and between the format command line and the
character selection list.
Figure 6-3. Print Formatting Character Selection Display