Rice Lake iRite IDE - Manual (Page 41)

920i Programming Reference - API Reference 37
Example:
AvgAccum : Real;
…
GetAvgAccum (Scale1, AvgAccum);
GetUnitsString
Sets V to the text string representing the current display units for scale S.
Method Signature:
function GetUnitsString (S : Integer; U : Units; VAR V : String) : SysCode;
Parameters:
[in] S Scale number
[in] U Units (Primary, Secondary, Tertiary)
[out] V Current display units string
Units values sent:
Primary Primary units are currently displayed on scale S .
Secondary Secondary units are currently displayed on scale S .
Tertiary Tertiary units are currently displayed on scale S .
SysCode values returned:
SysInvalidScale The scale specified by S does not exist.
SysInvalidUnits The units value specified by U does not exist.
SysOK The function completed successfully.
Example:
CurrentUnitsString : Units;
…
GetUnitsString (Scale1, Primary, CurrentUnitsString);
SetAccum
Sets the value of the accumulator associated with scale S to weight W, in units specified by U.
Method Signature:
function SetAccum (S : Integer; U : Units; W : Real) : SysCode;
Parameters:
[in] S Scale number
[in] U Units (Primary, Secondary, Tertiary)
[in] W Accumulator value
SysCode values returned:
SysInvalidScale The scale specified by S does not exist.
SysInvalidUnits The units specified by U is not valid.
SysDeviceError The scale is reporting an error condition.
SysPermissionDenied The accumulator is not enabled for the specified scale.
SysOK The function completed successfully.
Example:
AccumValue : Real;
…
AccumValue := 110.5
SetAccum (Scale1, Primary, AccumValue);
5.1.5 Scale Operations
CurrentScale
Sets S to the numeric ID of the currently displayed scale.
Method Signature:
function CurrentScale : Integer;