Rice Lake iRite IDE - Manual (Page 58)

54 920i Programming Reference
GetSPBand
Sets V to the current band value (BANDVAL parameter) of the setpoint SP.
Method Signature:
function GetSPBand (SP : Integer; V : Real) : SysCode;
Parameters:
[in] S P Setpoint number
[out] V Band value
SysCode values returned:
SysInvalidSetpoint The setpoint specified by SP does not exist.
SysInvalidRequest The setpoint specified by SP has no hysteresis (BANDVAL) parameter.
SysOK The function completed successfully.
Example:
SP7Bandval : Real;
…
GetSPBand (7, SP7BAndval);
WriteLn (Port1, "Current Band Value of SP7 is", SP7Bandval);
GetSPCaptured
Sets V to the weight value that satisfied the setpoint SP.
Method Signature:
function GetSPCaptured (SP : Integer; V : Real) : SysCode;
Parameters:
[in] S P Setpoint number
[out] V Captured weight value
SysCode values returned:
SysInvalidSetpoint The setpoint number specified by SP is less than 1 or greater than 100.
SysInvalidRequest The setpoint has no captured value.
SysOK The function completed successfully.
GetSPCount
For DINCNT setpoints, sets Count to the value specified for setpoint SP.
Method Signature:
function GetSPCount (SP : Integer; VAR Count : Integer) : SysCode;
Parameters:
[in] S P Setpoint number
[out] Count Count value
SysCode values returned:
SysInvalidSetpoint The setpoint number specified by SP is less than 1 or greater than 100.
SysInvalidRequest The specified setpoint is not a DINCNT setpoint.
SysOK The function completed successfully.
GetSPDuration
For time of day (TOD) setpoints, sets DT to the current trip duration (DURATION parameter) of the setpoint SP.
Method Signature:
function GetSPDuration (SP : Integer; VAR DT : DateTime) : SysCode;
Parameters:
[in] S P Setpoint number
[out] DT Setpoint trip duration
SysCode values returned:
SysInvalidSetpoint The setpoint specified by SP does not exist.
SysInvalidRequest The setpoint specified by SP has no DURATION parameter.
SysOK The function completed successfully.