Rice Lake iRite IDE - Manual (Page 53)

920i Programming Reference - API Reference 49
Method Signature:
function UnlockKey (K : Keys) : SysCode;
Parameters:
[in] K Key name
SysCode values returned:
SysInvalidKey The key specified is not valid.
SysOK The function completed successfully.
UnlockKeypad
Enables operation of the entire front panel keypad.
Method Signature:
function UnlockKeypad : SysCode;
SysCode values returned:
SysPermissionDenied
SysOK
The function completed successfully.
WaitForEntry()
Similar to GetEntry, WaitForEntry causes the user program to wait for operator input. Wait time is specified in
0.01-second intervals (1/100 seconds); if the wait time is set to zero, the procedure will wait indefinitely or until
the
Enter key is pressed.
Note
The UserEntry handler must be disabled (see DisableHandler on page 42) before using this procedure.
Method Signature:
procedure WaitForEntry (I : Integer);
Parameters:
[in] I Wait time value
5.3 Serial I/O
Print
Requests a print operation using the print format specified by F. Output is sent to the port specified in the print
format configuration.
Method Signature:
function Print (F : PrintFormat) : SysCode;
Parameters:
[in] F Print format
PrintFormat values sent:
GrossFmt Gross format
NetFmt Net format
TrWInFmt Truck weigh-in format
TrRegFmt Truck register format (truck IDs and tare weights)
TrWOutFmt Truck weigh-out format
SPFmt Setpoint format
AccumFmt Accumulator format
AuxFmtx Auxiliary format
SysCode values returned:
SysInvalidRequest The print format specified by F does not exist.
SysQFull The request could not be processed because the print queue is full.
SysOK The function completed successfully.