Rice Lake Adventurer Pro Series Precision, Ohaus - Manual (Page 39)

ADVENTURER BALANCES EN-37
5.6.6 Auto Print
Set the automatic printing functionality.
OFF = disabled
ON STABILITY
1
= printing occurs each time the stability criteria are met.
INTERVAL
2
= printing occurs at the defined time interval.
CONTINUOUS = printing occurs continuously.
1
When ON STABILITY is selected, set the conditions for printing.
LOAD = Prints when the displayed load is stable.
LOAD ZERO = Prints when the displayed load and zero reading is stable.
2
When INTERVAL is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 0.
5.6.7 Print Content
Define the content of the printed data.
Selection
Set the status.
Deselect All = all are set to OFF
Select All = all are set to ON
Header
Date & Time
Balance ID
Balance Name
User Name
Project Name
Application Name
Sample Name
Result
Gross
Net
Tare
Information
Signature Line
5.6.8 Feed
Set the paper feed.
1 LINE = move the paper up one line after printing.
4 LINE = move the paper up four lines after printing.
Save to USB
Set the status.
OFF = the data will not be saved to USB
ON = the data will be saved to USB