Rice Lake CLS-920 WLAN Option User Manual
Wlan installation instructions, Cls-920i cargo lift scale
May 05, 2014
100977 Rev A
CLS-920i Cargo Lift Scale
WLAN Installation Instructions
PN 96355
Note
Before installing this option, contact the IT administrator to obtain network communication protocol codes
and have a RS-232 communications cable or regular comm port cable available to run between the PC and
the 920i while installing and setting up the wireless network.
The CLS-920i Cargo Lift Scale offers an optional Lantronix
®
WiPort
(WLAN - Wireless Local Area Network)
wireless networking device which is installed inside the 920i indicator. This option can be used for real-time data
transmission to warehouse management systems. The Windows
®
based configuration software, DeviceInstaller
is
required for installation and setup. It is available on the CD that comes with the kit. The WLAN option can be
factory installed upon request when purchasing the CLS-920i Cargo Lift scale or can be purchased separately and
installed on site.
The wireless LAN option kit contains the following:
•
Pluggable wireless board (PN 97789)
•
Antenna (PN 98357)
•
CD containing Lantronix information (PN 72763)
The following photo shows the WLAN card and antenna inside the 920i enclosure.
WLAN board location
in 920i indicator
Antenna location
Figure 1. WLAN Board and Antenna Location Inside the 920i Enclosure