Rice Lake CLS-920 WLAN Option User Manual
Page 7
7
Upon a successful connection, the following information is displayed.
Figure 11. Display Information for Setup Mode
10. To enter Setup Mode, press
Enter
within five seconds.
Note
The connection will fail if Enter is not pressed within the five second time limit. The configuration settings
display, followed by the setup menu options. If this happens, repeat Step 8 through Step 10.
11. Select an option on the menu by entering the number of the option in
Your Choice?
field and press
Enter
.
Example: To set up the WLAN options, press
4
and press
Enter
Figure 12. Change Setup Screen
Note
View the current configuration by pressing Enter from the Change Setup menu. To enter a value for a
parameter, type the value and press Enter. To confirm a current value, press Enter (without inputted
parameters).
12. Enter the desired Topology for the WLAN option.
Figure 13. Topology Screen
The two choices are:
• 0 = Infrastructure
• 1 = AdHoc.
Select
0
and press
Enter
.