Rice Lake CLS-920 WLAN Option - Manual (Page 9)

9
16. The next step is to set the authentication level for the configuration as shown in Figure 16.
Figure 16. Authentication Screen
Authentication choices are:
• 0 = open/none
• 1 = Shared
Select 0 = open/none and press Enter .
17. Select the correct encryption next. Choices are WEP64 and WEP128 as shown in Figure 17.

Select 1 = WEP64 as the default parameter and press Enter .
Figure 17. Encryption Screen
18. Display current key? is displayed. Press N and press Enter .
Figure 18. Display Current Screen
Note
Select Yes (Y) for the display current key option to show the currently configured key/passphrase.