Mounting the antenna – Rice Lake CLS-920 WLAN Option User Manual
Page 3
3
Mounting the Antenna
The antenna is already wired to the WLAN board.
1. Place the antenna through the smallest cord grip, furthest away from the 802.15 wireless load cell kit
(see Figure 3).
1. Tighten the antenna once its been pushed through the hole.
Antenna extending out
from the bottom of the
indicator
Figure 3. Location of the WLAN Antenna
The CLS-920i automatically recognizes installed option cards when the unit is powered on.
Place the 802.15
wireless load cell
module far enough
away from the WLAN
antenna per FCC rules
See WiPort Disclaimer
on page 13.
Place WLAN antenna
in cord grip furthest
from 802.15 wireless
load cell module.
Note
To comply with FCC regulations, the antenna should be placed as far as possible away from the 802.15
wireless load cell kit module. The following photo shows the 802.15 wireless load cell module and WLAN
antenna locations on the indicator.
Figure 4. Location of 802.15 Wireless Load Cell Module and WLAN Antenna Location