Enclosure reassembly, Wiport wireless specifications – Rice Lake CLS-920 WLAN Option User Manual
Page 11
11
Enclosure Reassembly
Once cabling is complete:
1. Position the backplate over the enclosure.
2. Reinstall the backplate screws.
5PSRVFCBDLQMBUFTDSFXT
UPJOMC /N
Important
Use the torque pattern shown in Figure 21 to prevent distorting the backplate gasket. Torque screws to
15 in-lb. (1.7 N-m).
Figure 21.
CLS-920i
Enclosure Backplate
Important
Torqued screws may become less tight as the gasket is compressed during torque pattern, therefore a
second torque is required using the same pattern and torque value.
WiPort Wireless Specifications
Table 1. WiPort Wireless Specifications
Category
Description
Network Standards
IEEE 802.11b; IEEE 802.11g
Frequency Range
2.412 - 2.484 GHz
Antenna Connector
1, no diversity supported
Data Rates
1, 2, 5.5, 11Mbps (802.11b)
6, 9, 12, 18, 24, 36, 48, 54Mbps (802.11g)
Radio
Number of Selectable
Channels
Up to 14 channels. Profiles available will include USA, France, Japan, Spain,
Canada and "other" (multiple countries).
Modulations
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
Antenna Connector
1
Security
WEP 64/128, WPA-PSK, TKIP, AES end-to-end encryption
Maximum Receive Level
-10 dBm (with PER < 8%)
Receiver Sensitivity
-72 dBm for 54Mbps
-87 dBm for 11Mbps
-89 dBm for 5.5Mbps
-90 dBm for 2.0Mbps
-92 dBm for 1.0Mbps
WLAN Power and Link LED Current
Max: 4 mA