Rice Lake Retail Scales - MajorSlice 350A - Manual (Page 6)

2 MajorSlice™ 350A
2.0 Installation
Notify the carrier immediately if shipping carton is damaged. If equipment is damaged, notify the carrier
within five days and save all documents.
1. Carefully remove packing material from top and sides of machine.
Avoid touching exposed knife.
Lift only at the bottom of the unit. Lifting at any other area may cause damage to the components and
will void the warranty.
2. With the assistance of another person, lift machine from the carton by lifting from the bottom of the machine base.
Never pick up the machine by the knife guard or gauge plate.
3. Place machine on a solid level table or support. Must be able to support 144 lb (65 kg).
4. Inspect machine for damage and proper guard placement.
5. Plug machine into a properly grounded outlet using the plug supplied with the machine. The proper voltage use will be
specified on the machine serial number plate.
6. Test the machine power by turning on the power switch.
If the machine is not running correctly, immediately press the red OFF button and contact customer service.
7. Clean and sanitize the machine before using (See Section 5.2 on page 21).
Note
WARNING
Important
WARNING
Note