Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.0 - Manual (Page 77)

Counterpart User Manual - Print Formatting 71
Gross, net, and tare weights are 8 digits in length, including sign and decimal point, followed by a
space and a one- to five-digit units identifier. Total field length with units identifier is 10-14 characters.
Depending on what units are configured, the units identifier will be lb, oz, g, or kg.
Gross, net, tare, and accumulator weights can be printed in any configured weight units by adding the
following modifiers to the gross, net, tare, and accumulator weight commands: /P (primary units), /D
(displayed units), /S (secondary units), /T (tertiary units). If not specified, the current displayed units (/
D) is assumed. Example: To format a ticket to show net weight in secondary units, use the following
command: <N/S>.
UNIT ID and consecutive number (CN) fields are 1–6 characters in length, as required.
* If nn is not specified, 1 is assumed. Value must be in the range 1–99.
** After receiving an SU command, the indicator sends unformatted data until the next SU command
is received. Unformatted data omits decimal points, leading and trailing characters.
Format Default Format String Used When
NFMT
N<NL>A30,75,0,4,1,1,N,"Gross:
<G>"<NL>B30,115,0,3,2,4,101,B,"<G>"<NL>A30,300,0,4,1,1,N,
"Tare: <T>"<NL>B30,340,0,3,2,4,101,B,"<T>"<NL>A30,525,0,4,1,1,N,
"Net: <N>"<NL>B30,565,0,3,2,4,101,B,"<N>"<NL>A30,806,0,3,1,1,N,"<TD>"<NL>
P1<NL>
Normal mode, tare in
system
PALFMT
N<NL>A416,25,1,4,1,1,N,"ID CODE:
<IDC>"<NL>B378,25,1,3,2,4,51,N,"3<IDC>"<NL>A296,28,1,4,1,1,N,"Total QTY:
<C>"<NL>B264,22,1,3,2,4,51,N,"<C>"<NL>
A179,25,1,4,1,1,N,"Part Name: <IDD>"<NL>A126,25,1,4,1,1,N,"Part Number:
<IDP>"<NL>A73,25,1,4,1,1,N,"Lot Number: <IDLT>"<NL>P1<NL>
Print mode
CFMT
N<NL>B371,20,1,3,2,4,51,N,"3<IDC>"<NL>A410,20,1,4,1,1,N,"ID. CODE:
<IDC>"<NL>A302,22,1,4,1,1,N,"QTY:
<C>"<NL>B264,20,1,3,2,4,51,N,"<C>"<NL>A280,400,1,4,1,1,N,"GROSS
<G>"<NL>
A225,400,1,4,1,1,N,"TARE
<T>"<NL>B189,355,1,3,2,4,51,N,"4<T>"<NL>A120,400,1,4,1,1,N,"NET
<N>"<NL>A195,24,1,4,1,1,N,"WT/K OR U
W"<NL>B124,20,1,3,2,4,51,N,"1<IDW>"<NL>
A47,16,1,4,1,1,N,"<TD>"<NL>A160,24,1,4,1,1,N,"<IDW>"<NL>P1<NL>
Count mode
GFMT
N<NL>A376,47,1,4,4,3,N”G<G>”<NL>B233,73,1,3,2,4,101,B”<G>”<NL>A73,77,1,
4,1,1,N”<TD>”<NL>P1<NL>
Normal mode, no tare in
system
TOTAL
N<NL>A410,32,1,5,2,1,N,"<TOTAL
QUANTITY>"<NL>A57,532,1,3,1,1,N,"<TD>"<NL>A309,39,1,5,2,1,N,"<TTLV>"<NL
>B195,32,1,3,2,4,101,N,"<TV>"<NL>
A61,32,1,5,1,1,N,"BOX COUNT: <TTLC>"<NL>P1<NL>
Totalization mode
SPFMT
N<NL>A274,53,1,2,3,3,N,”<IDD>”<NL>B421,55,1,3,1,2,96,B,”<IDC>”<NL>A96,49,
1,1,4,4,N,”QTY<SCVC>”<NL>P1<NL>
Setpoint mode
ACCFMT
N<NL>A410,32,1,5,2,1,N,"TOTAL
QUANTITY"<NL>A57,532,1,3,1,1,N,"<TD>"<NL>A309,39,1,5,2,1,N,"<A>"<NL>B19
5,32,1,3,2,4,101,N,"<AC>"<NL>
A61,32,1,5,1,1,N,"ACCUMULATIONS: <AC>"<NL>P1<NL>
Accumulator enabled
and displayed
Table 7-2. Default Print Formats
Command Description
Supported Ticket
Formats
Table 7-1. Print Format Commands