3 continuous output (stream) format, 4 demand output serial data format, 5 custom stream formatting – Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.1 User Manual

Page 86: Stx> <c> <cr

Advertising
background image

80

Counterpart User Manual

9.3

Continuous Output (Stream) Format

Figure 9-1 shows the default continuous output format sent to a Counterpart port when that port’s STREAM
parameter (SERIAL menu) is set to LFT or INDUST.

Figure 9-1. Continuous Output Data Format

9.4

Demand Output Serial Data Format

When demand mode is configured for the serial port (STREAM parameter set to OFF), the

Counterpart

uses a

data string formatted for a basic ticket printout. The particular ticket format printed depends on the indicator
configuration.

You can customize the ticket to work with a wide variety of printers, scoreboard displays, and other remote
equipment. See Section 6.0 on page 52 for more information on custom print formats.

9.5

Custom Stream Formatting

Each port can be independently configured to stream a default frame format or can be customized to stream a
user-defined format. Custom formatting is very similar to the standard print formatting described in Section 7.0
on page 52
. Table 9-3 lists the format identifiers used to configure a custom stream format.

<STX> <C>

<CR>

ASCII 02
(decimal)

Count Data:

6 Characters

<CR> <LF>

or <CR>

ASCII 13, 10

(decimal)

<LF>

Format Identifier

Defined By

Description

<P[G | N | T]>

STR.POS#n
STR.NEG#n

Polarity. Specifies positive or negative polarity for the current or
specified (Gross/Net/Tare) weight on the source scale. Possible
values are SPACE, NONE, + (for STR.POS), or – (for STR.NEG)

<CU>

STR.PRI#n
STR.SEC#n
STR.TER#n

Units. Specifies primary, secondary, or tertiary units for the current or
specified weight on the source scale.

<U[P | S | T]>

Dynamic

=L if Units=LB
=K if Units=KG
=G if Units=G
=O if Units=OZ

<M[G | N | T]>

STR.GROSS#n
STR.NET#n
STR.TARE#n

Mode. Specifies gross, net, or tare weight for the current or
specified weight on the source scale.

<S>

STR.MOTION#n
STR.RANGE#n
STR.OK#n
STR.INVALI#n

Status for the source scale. Default values and meanings for each
status:
STR.MOTIONMIn motion
STR.RANGEOOut of range
STR.OK<space>OK
STR.INVALIDIInvalid

<C>

-

Piece count for the currently viewed scale

Table 9-3. Custom Stream Formatting

Advertising