Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.1 - Manual (Page 93)

Counterpart User Manual - For More Information 87
9.10 Regulatory Mode and Legal-for-Trade (LFT)
When REGULAT is set for NONE or INDUST there are no restrictions on displaying both the weight and
piece count data.
If the unit is going to be used in Legal-for-Trade applications, weight and piece count data cannot be displayed at
the same time. Use the following examples to use Counterpart in Legal-for-Trade applications.
9.10.1 Legal-for-Trade and Normal Weight Mode
When in a Legal-for-Trade mode (REGULAT = NTEP, OIML, or CANADA) and the unit is in normal weigh
mode:
• If the weight is displayed in the main area (either as a result of the DSPMODE parameter being set
for WEIGHT or the Swap Display softkey was pressed) then the piece count and unit weight are not
displayed.
• If the piece count is displayed in the main area (either as a result of the DSPMODE parameter being
set for COUNT or the Swap Display softkey was pressed) then the weight is not displayed. The unit
weight will be displayed in the left display area.
• If the unit weight is displayed in the main area (either as a result of the DSPMODE parameter being
set for UNITWEIGHT or the Swap Display softkey was pressed) then the weight is not displayed.
The piece count will be displayed in the left display area.
Note