Rice Lake Digi DI-28SS Bench Scale - Manual (Page 12)

5.3. Battery Life Check
The battery life can be checked
PROCEDURE KEY OPERATION DISPLAY INDICATOR
0 NET
Stand-by status 0.000 ♦
1. Press [TARE],
[ ], [TARE] key
while pressing [RE-
ZERO] key.
+ , ,
2. Press [TARE] key
to beback to weighing
mode. 0.000 ♦
The number of boxes in the display indicates the battery power. When batteries are fully charged,
6 boxes appear. As the battery is running out of power, the number of boxes will decrease
gradually.
[10]
Options (continued)
7.4.3. Spec Setting
SPEC 52 Bit 2 Send STX before text
0 No 1 Yes
SPEC 52 Bit 3 Handshaking for RS232 output
0 No 1 Yes
SPEC 53 Bit 0 Send Header as text
0 No 1 Yes
SPEC 53 Bit 1 RS232C data sending method
0 Send immediately 1 After data is stable
SPEC 53 Bit 2 RS232 data format
0 Without header 1 With header
SPEC 53 Bit 3 Stable flag in RS232C
0 Without stable flag 1 With stable flag
SPEC 54 Bit 0, 1 and 2 RS232C baud rate
0 0 0
1200 0 1 0 4800 1 0 0 19200
0 0 1 2400 0 1 1 9600
SPEC 54 Bit 3 RS232C output
0 Disable 1 Enable
SPEC 55 Bit 0 RS232C data length
0 7 bit 1 8 bit
SPEC 55 Bit 1 RS232C stop bit
0 1 bit 1 2 bits
SPEC 55 Bit 2 and 3 RS232C parity bit
0 0 No parity 0 1 Odd 1 0 Even
SPEC 59 Bit 0 and 1 RS232C time out error
0 0 1 sec 1 0 5 sec
0 1 3 sec 1 1 10 sec
SPEC 59 Bit 2 Stream / Manual method
0 Stream 1 Manual
SPEC 59 Bit 3 Remote trigger for RS232C
0 Disable 1 Enable
[23]
0
T
T
T