Rice Lake Digi DI-28SS Bench Scale - Manual (Page 8)

INSTALLATION
This section provides the information required for installation of
the DI-28SS weight indicator.
The following steps accomplish installation.
1. Unpacking
2. Set-up
Procedure
3.1. Unpacking
Each component of the DI-28SS is packed in a specially designed
carton. Remove each component from the
carton, separate the component from its polystyrene
shell assembly and set aside. Inspect the carton interior
to be sure that all accessories have been removed from
the carton. Inspect the carton inner panels for accessories.
NOTE: Be sure to repack all materials within the carton set.
Store the cartons in a secure area so they can be available
whenever shipment of the scale is required.
3.2. Inspection
Immediately after unpacking, a visual inspection of the
instrument should be performed. If any damage has been
incurred during transportation the shipper and DIGI AMERICAS
should be notified immediately. Instructions for assessment of
damage and further procedures will then be determined.
3.3. Repackaging
If, at anytime, the DI-28SS weight indicator must be returned for
modification, calibration, or repair, be sure that it is properly
packed with sufficient cushioning materials. Whenever possible,
the original carton assembly should be retained for this purpose.
Any damage caused by improper packaging will not be covered
by warranty.
[6]
ii)
Manual method (SPEC 59 Bit 2 is 1)
No handshaking (SEPC 52 bit 3 is 0)
Press [
↑ ] key to send data.
PC DI - 28
[27]
TEXT