Program mode, Di- 28ss key function summary, Span enable switch check – Rice Lake Digi DI-28SS Bench Scale User Manual
Page 15: 20] program mode
6.6. Span Enable Switch Check
This Mode Is Provided To Check The Status of The
Span Switch. The SPAN SWITCH is
on the main board near the pre-amp housing and is
labeled JP 1. See Figure on Page 19.
Accessing Mode
1. Press and hold down the [REZERO] key.
2. While holding , press the[TARE] key, the
[
←
←
←
← DIGIT] key, the [←
←
←
← DIGIT] key.
3. Then release the [REZERO] key.
When Calibration is enabled Display Shows : S- ON
[20]
PROGRAM MODE
DI-28SS Key Function Summary
KEY REZERO
TARE
←
←
←
←
DIGIT
↑↑↑↑
INCREASE
INTERNAL COUNT
REZERO (D D T)
REZERO
EXIT
- - - -
CHANGE
MODE
OPERATIONAL
SPECS
REZRO (D D D)
STORE &
INCREMENT
SPEC
EXIT
INPUT 0
INPUT 1
W & M SPECS
REZERO (D T D)
STORE &
INCREMENT
SPEC
EXIT
INPUT 0
INPUT 1
SPAN ADJUSTMENT
REZERO (D T T)
STORE / RDY
FOR CAL
EXIT SELECT
DIGIT
INCREASE
NUMBER
SET POINT
PROGRAMMING
REZERO ( I I I )
STORE &
INCREMENT
SET POINT
EXIT SELECT
DIGIT
INCREASE
NUMBER
SPAN SWITCH
STATUS
REZERO (T D D)
- - - -
- - - -
- - - -
- - - -
BATTERY LIFE
CHECK
REZERO ( T D T)
- - - -
EXIT
- - - -
- - - -
D =
←
←
←
←DIGIT I
=
↑↑↑↑INCR
T = TARE
[13]