Rice Lake IQ Plus 210 Digital Weight Indicator - Manual (Page 16)

12 IQ plus 2100 Installation Manual
Front Panel Menu Navigation
The front panel buttons are used to navigate through the
menus in setup mode (see Figure 3-2). The
UNITS
( RIGHT ) button scrolls right (horizontally) on the same
menu level; the ZERO ( ENTER ) button moves down
(vertically) to different menu levels and serves as an
Enter key for selecting parameter values within the
menus.
Most of the configuration menus have three or four
levels. Figure 3-3 shows the general structure of the IQ
plus 210 configuration menus. Note the following:
• On the first (main) menu level, press RIGHT to scroll
through the menus. Pressing RIGHT from the VERS
menu wraps around to the CONFIG menu. Press
ENTER from any of the main menus to move down
to the first parameter for that menu.
• On the middle (parameter) menu levels, press
RIGHT to scroll through the parameter prompts
for the menu. When the last parameter is
displayed, pressing
RIGHT returns to the level
above. Press ENTER from any parameter prompt
to move down to the values prompts for that
parameter.
• On the bottom (parameter value) menu level,
press
RIGHT to scroll through the values for the
parameter. Pressing RIGHT from the last value
wraps around to first value. Press ENTER to
select the value and return to the parameter
prompt.
Figure 3-4 on page 13 shows an example of the
navigation used to select a parameter value under the
SERIAL menu.
To edit numerical values, use the RIGHT button to
select the digit; use the ENTER button to increment or
decrement the value of the flashing digit (see Figure 3-5
on page 13). Once all digits have been edited, press
ENTER to save the value and return to the parameter
prompt.
Figure 3-3. General Menu Structure
Parameter 1
Value 1
XXXXXXX XXXXXXX VERS DEFLT DIG IN SERIAL CALIBR CONFIG FORMAT
RIGHT
RIGHT RIGHT RIGHT
Menu Navigation
General Structure
RIGHT
RIGHT RIGHT RIGHT
ENTER
RIGHT RIGHT
RIGHT
Press ENTER at any parameter value to select the value and return to the parameter prompt
RIGHT
RIGHT RIGHT RIGHT
Parameter 2 Parameter 3 Parameter 4
Value 2 Value 3 Value 4
ENTER
Pressing RIGHT at the last parameter prompt returns to the menu prompt
(ENTER)
ZERO
(RIGHT)
UNITS