5 digital input menu, 6 default menu, 7 version menu – Rice Lake IQ Plus 210 Digital Weight Indicator User Manual
Page 23: Digital input menu, Default menu, Version menu
Configuration
19
3.2.5
Digital Input Menu
Figure 3-10. Digital Input Menu
3.2.6
Default Menu
The DEFLT menu is used to reset indicator configuration to the default values. There are no parameters
associated with the DEFLT menu. From the DEFLT menu, press
ENTER
(
ZERO
) to move down to the RESET
parameter. Press
ENTER
again to reset the indicator to the default configuration values or press
RIGHT
(
UNITS
)
to cancel the indicator reset and return to the menu level above.
NOTE:
All load cell calibration settings are lost
when the RESET function is performed.
Figure 3-11. Default Menu
3.2.7
Version Menu
The VERS menu is used to check the software version installed in the indicator. There are no parameters
associated with the VERS menu: when selected, the indicator displays the installed software version number.
Figure 3-12. Version Menu
DIG IN Menu
Parameter
Choices
Description
Level 2 submenus
DIGIN1
DIGIN2
OFF
ZERO
UNITS
PRINT
Specifies the function activated by digital inputs 1 and 2.
Table 3-6. Digital Input Menu Parameters
XXXXXXX
XXXXXXX
VERS
DEFLT
DIG IN
SERIAL
CALIBR
CONFIG
FORMAT
DIGIN1
OFF
DIGIN2
ZERO
UNITS
OFF
ZERO
UNITS
XXXXXXX
XXXXXXX
VERS
DEFLT
DIG IN
SERIAL
CALIBR
CONFIG
FORMAT
RESET
XXXXXXX
XXXXXXX
VERS
DEFLT
DIG IN
SERIAL
CALIBR
CONFIG
FORMAT
Software
version