4 pos code – Rice Lake Ishida Astra Operating Manual User Manual
Page 26
page 20
ASTRA • Operation Manual • Rev. 0124C
Chapter 3. Setup Mode
➝
➝
➝
➝
ENTER
Example: POS code flag “5”
ENTER
5
➜
➝
Example: POS Code Type “3”
ENTER
➜
3
Note: F
= Flag
C
= Item code
P
= Price
W
= Weight
I
= PLU no.
M
= Manufacturer code
(C/P) = Check price
(C/D) = Check digit
➝
or
➜
2
Note: Refer to page 14, Section 3.1 to enter the Setup Mode.
• Default value is 2
3.4 POS Code
PROCEDURES
1
Press the DOWN ARROW key ( ) until
the POS Code menu (b02) appears or
key in “2” followed by the DOWN
ARROW key ( ) to enter the menu
directly.
2
Press the ENTER key to enter the
Flag menu (b02-01).
3
Key in the Flag Number (2 digits) and
press the ENTER key.
Note: In case a 3 digit or 4 digit code is keyed in
by mistake, the last 2 digits are
programmed as the flag code.
4
Press the DOWN ARROW key ( ) to
enter the Type menu.
5
Key in the POS Code Type (1 to 15)
and press the ENTER key.
■
POS Code Type
1
1 : FFCCCCC(C/P)PPPP(C/D)
1
2 : FFCCCCCCPPPP(C/D)
1
3 : FCCCCCC(C/P)PPPP(C/D)
1
4 : FFCCCCCPPPPP(C/D)
1
5 : FCCCCCCPPPPP(C/D)
1
6 : FFCCCC(C/P)PPPPP(C/D)
1
7 : FFCCCCCCWWWW(C/D)
1
8 : FCCCCCCWWWWW(C/D)
1
9 : FCCCCCII III I(C/D)
10 : FFCCCCCCPPPP(C/D) – EAN Code
11 : FFCCCCCCWWWW(C/D) – EAN Code
12 : FFCCCC(C/P)WWWWW(C/D)
13 : FFMMMCCPPPPP(C/D)
14 : FFMMCCCPPPPP(C/D)
15 : FFCCCCC(0)PPPP(C/D)
(0)
= Fixed zero