Rice Lake Ishida Astra Operating Manual - Manual (Page 28)

page 22 ASTRA • Operation Manual • Rev. 0124C
Chapter 3. Setup Mode
➝ ➝
ENTER
Example: PLU number “44”
4
ENTER
4 ➜
END
or
➜
➝
3
Note: Refer to page 14, Section 3.1 to enter the Setup Mode.
➝
3.5 Bar Code
PROCEDURES
1 Press the DOWN ARROW key ( ) until
the Bar Code menu (b03) appears or
key in “3” followed by the DOWN
ARROW key ( ) to enter the menu
directly.
2 Press the ENTER key to enter the
Position setup (b03-01).
3 Key in the start position and number
of digits of the PLU Code, and press
the ENTER key.
Note: Default value “36” indicates 6 digits from 3rd digit
of the barcode (step P01-09).
4 Press the END key to return to the
LABEL menu (b01).
Example : 12345678
ZERO
MODE
5 Press the MODE key to return to
Normal Operation mode after all
SETUP mode procedures are
completed.