Rice Lake Ishida Astra Operating Manual - Manual (Page 30)

page 24 ASTRA • Operation Manual • Rev. 0124C
Chapter 3. Setup Mode
➝ ➝
5
3.7 Total
PROCEDURES
1 Press the DOWN ARROW key ( ) until
the Total menu (b05) appears or key
in “5” followed by the DOWN ARROW
key ( ) to enter the menu directly.
2 Press the ENTER key to enter the
Total Selection menu (b05-01).
Note: This menu selects whether or not the
transaction data is added to total data.
3 Key in “0” or “1” and press the
ENTER key.
0 : Not added
1 : Added
Note: Number “0” is the default value.
4 Press the END key to return to the
LABEL menu (b01).
➝
ENTER
Example: Select “1”
ENTER
➜
1
END
➝
or
➜
Note: Refer to page 14, Section 3.1 to enter the Setup Mode.
ZERO
MODE
5 Press the MODE key to return to
Normal Operation mode after all
SETUP mode procedures are
completed.