1 total mode operations – Rice Lake Ishida Astra Operating Manual User Manual
Page 72
page 66
ASTRA • Operation Manual • Rev. 0124C
Chapter 7. Total Mode
MODE
➝
➝
8
0
➜
0
0
➝
ENTER
END
➝
ENTER
7.1 Total Mode Operations
These operations are usually performed at the end of the working day to verify the processed data from that day.
PROCEDURES
1
Key in 8000 and press the MODE key
to enter the Total Mode.
2
Press the DOWN ARROW key ( ) to
enter the Grand Total menu.
3
Press the ENTER key to enter the next
step.
4
Press the PRINT key to print and
issue the Grand Total label.
5
Press the END key to return to display
“F01 GRAND TOTAL”.
6
Press the DOWN ARROW key ( ) to
enter the Total on Label menu.
7
Press the ENTER key to enter the next
step.
●
Printing starts from the first PLU number with
totals data.
●
Starting PLU number can be designated by
entering the PLU number and pressing the
PRINT key.
●
To stop printing before completion, press the
ZERO key.
Note: If the Total Report on Labels contains
many items, don't thread paper onto
takeup bobbin. Allow labels to remain on
backing paper.