Rice Lake Ishida IGX & IGB Series - Operation Manual - Manual (Page 14)

2.1 Presetting the Values
IGX/IGB Series Operation Manual No. 0202A page 11
2
PRES
ET FUNCTI
O
N
Setting the Tare Weight
4
Press the SET key to display the tare weight for the selected PLU.
IGX Series IGB Series
Ä
5
Move the flashing digit to the desired position by pressing the COLUMN key.
IGX Series IGB Series
Ä
6
Increase or decrease the numeric value by pressing the ZERO (+) or TARE (-) key. Then,
press the COLUMN key to determine the value. Repeat this step until completing the entry.
[Example] Tare weight 250g
or
Д Д
IGX Series IGB Series
Setting the Upper Limit Value
7
Press the SET key to determine the tare weight and move to the display for setting the upper
limit value.
Move the flashing digit to the desired position by pressing the COLUMN key.
IGX Series IGB Series
Д