Rice Lake Ishida IGX & IGB Series - Operation Manual User Manual
Page 17
Advertising
2.2 Calling Up the Preset Values
page 14
IGX/IGB Series Operation Manual No. 0202A
2.2 CALLING UP THE PRESET VALUES
1
Press and hold the SET key for two seconds.
“PLU 1” will be displayed.
IGX Series
IGB Series
(2 sec.)
Ä
2
Press the ZERO (+) or TARE (-) key to select the desired PLU No.
IGX Series
IGB Series
or
Ä
3
Press the SET key to display the tare weight, the upper limit value, and the lower limit value.
IGX Series
IGB Series
Ä
b
b
b
b
NOTE
If no tare weight has been set, or if neither the upper limit value nor the lower limit
value has been set, the values set before pressing the SET key will remain active.
Advertising