Rice Lake Ishida IGX & IGB Series - Operation Manual - Manual (Page 35)

6.1 Troubleshooting
page 32 IGX/IGB Series Operation Manual No. 0202A
6.1 TROUBLESHOOTING
If an error occurs while using the scale, take appropriate measures according to instructions in the
following table.
If you have any other problems, contact your nearest ISHIDA dealer.
Symptom Measures
The display unit does not indicate any
value or symbol when the ON/OFF key is
pressed. y Check the power source.
“0” does not appear after finishing a
display check. y Place the scale on a stable flat surface.
y Use the level adjuster to stabilize the scale.
y Protect the scale from strong winds.
y Don’t place the item close to the display pole.
The weight results are different. y Place the scale on a stable flat surface or table.
y Check that there is nothing on the scale.
y Use the level adjuster to stabilize the scale.
y Protect the scale from strong winds.