Rice Lake Loadrunner Series Onboard Roll-Off Load Pin, 2.5 User Manual
Loadrunner, Series, Installation & service manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Content
- Introduction
- Safety
- 1.0 Considerations Before Installation
- 2.0 Load Pin and Transducer Specification
- 3.0 Roll Off Load Pin Installation
- 4.0 Configuration and Calibration
- 4.1 User and Setup Menu
- 4.2 Initial Setup of the OB-350 Indicator
- 4.2.1 Initial Password Entry and Clock Setup
- 4.2.2 Configuration of Input Channels
- 4.3 Configuration of Count By
- 4.4 Configuration of Zero Function
- 4.5 Configuration of Inclinometer Calibration
- 4.6 Configuration of Modes
- 4.7 Calibration
- 4.7.1 Calculating the SPAN (Net Weight)
- 4.7.2 Enter Tare Weight
- 4.7.3 Set Zero Calibration
- 4.7.4 Full Span (Net Load) Calibration
- 5.0 Service and Troubleshooting
- Hardware Warranty Statement