Canon 2900I - Manual (Page 116)

Installing the CAPT Software 3-21
Setting Up the Pr
inting En
vironment
3
4
Connect the A-type (flat) end of the USB cable to the USB port
on the computer.
5
Turn the computer on and start up Windows 2000.
IMPORTANT
If the Plug and Play automatic setup wizard appears, click [Cancel] and install the
CAPT software using the following procedure.
6
Log on as a user who is a member of the Administrators
group.
NOTE
Full Control Permissions are required for the installation of the printer driver.
7
Insert the supplied "LBP2900/2900i User Software" CD-ROM
into the CD-ROM drive.
If the CD-ROM is already in the drive, eject the CD-ROM and reinsert it into the
drive again.
The CD-ROM Setup appears automatically.
IMPORTANT
If the CD-ROM Setup does not start automatically, select [Run] from the [Start]
menu, enter "D:\English\CNAB4MNU.exe", and click the [OK] button. (In this case
the CD-ROM drive is assumed to be assigned to "D:". The actual CD-ROM drive
letter may be different depending on the computer you are using.)