Rice Lake Stationary Livestock Scale - MAS-LC - Operators Manual - Manual (Page 10)

Center Uprights
1/2 ”-13NC x 1 3/4” Screw
1/2 ” Lock Washer
1/2 ” Flat Washer Type B
Gate
Upright
Gate
Upright
Frame
6 Rice Lake Stationary Livestock Scale Operator’s Manual
Figure 2-3. Install Internal Overhead Assemblies
4. Align holes in wall panels with holes in uprights and secure in place with provided hardware.
5. Tighten hardware for the wall panels then tighten hardware securing the uprights to the frame.
3/8 ”-16 x 4” Screw
3/8 ” Lock Washer
3/8 ” Flat Washer
3/8 ” Nut
Center Upright
Wall Panels
Gate Upright
Important At center uprights, hardware will go through two wall panels (one on each side of the upright).
Figure 2-4. Install Wall Panels