0 assembly and installation, 1 unloading, 1 slinging the scale – Rice Lake Stationary Livestock Scale - MAS-LC - Operators Manual User Manual

Page 8: 2 lift the scale, 3 package removal, Assembly and installation, Slinging the scale, Lift the scale, Package removal

Advertising
background image

4

Rice Lake Stationary Livestock Scale Operator’s Manual

2.0 Assembly and Installation

2.1 Unloading

The unit is very heavy.

DANGER

Ensure that adequate straps are used for lifting the scale and that straps are in the

proper location. See Table 2-1 for strap lengths.
Ensure no one is under the scale when lifting and moving into the location selected.

2.1.1

Slinging the scale

MAS-LC animal scales can be slung with 4 equal length straps connected from the lifting lugs to a single point in
the center.

Table 2-1. Minimum Strap Length for Lifting

Model

Minimum Strap Length

22x10

13 ft

22x8

12 ft

19x8

10.5 ft

17x8

9.5 ft

15x8

9 ft

13x8

8 ft

Lift from the D-rings using
lifting bands (see detail),
lifting straps or chains
with safety latch hooks
and an overhead crane

Overload bolts must be engaged
prior to lifting the scale.

Lifting
Band

Safety
Latch
Hook

D-Ring

Lifting Band

Four Places

L i f t i n g b a n d s a r e
required on all units
less than 10 feet wide.

Note

Figure 2-1. Slinging the Scale

2.1.2

Lift the Scale

1. Lift the scale using adequate lifting straps and device.
2. Place on a prepared location, a firm surface that is straight, plumb and level. Store scale on the same type of

surface.

The unit is very heavy.

DANGER

Ensure that adequate straps are used for lifting the scale and that straps are in the

proper location. See Table 2-1 for strap lengths.
Ensure no one is under the scale when lifting and moving into the location selected.

CAUTION

Lifting bands on the D-rings (see Figure 2-1) are to be used only for unloading the scale from the truck.
Ensure the lifting device safety latch hooks are securely through both end of the bands before attempting
to lift. Once the scale is in place, the bands must be removed from the D-ring and discarded.

2.1.3

Package Removal

The indicator is shrink wrapped for transportation. Be careful when removing to avoid damaging the scale.

Note

Please recycle the packaging material.

Place the parts safely and in a location they will not be damaged.

Advertising