Configuring com1 and unicom – Rice Lake Sartorius Midrics 1 and 2 Series - Installation Instructions User Manual
Page 12
12
Configuring COM1 and UniCOM
Operating menu overview for the COM1 and UniCOM interfaces
(see also “Operating Menu Overview" in the chapter entitled “Configuration" in the Midrics operating instructions).
Appl
Fn-Key
Setup
WP-1
COM1
OFF *
DATPROT
SBI *
(data record)
XBPI-232
SMA
Printer
YDP01IS
Line *
Label
Label, man. form feed
YDP02
YDP03
YDP02IS
Line *
Label
UNI-PRI (universal printer)
YDP04IS
Line *
Label
Label, man. form feed
MEMORY
YAM01IS (Alibi memory)
UniCOM
OFF *
DATPROT
SBI *
(data record)
XBPI-232
XBPI-485
SMA
ETHERNET
Source IP: 192.168.0.1 *
Source name
Listen port: 49155 *
Subnet mask: 255.255.255.0 *
Gateway IP: 0.0.0.0 *
DNS IP: 0.0.0.0 *
Target IP: 0.0.0.0 *
Target port: 49155 *
Protocol
TCP *
UDP
Mode
SBI (server)-SRV*
6.1.
Data output manual/automatic
6.1.1
Manual without stability
6.1.2 * Manual after stability
6.1.4
Automatic without stability
6.1.5
Automatic with stability
6.1.7
Print log for PC
7.2.
Output: line format
7.2.1
For raw data: 16 characters
7.2.2 * For other apps: 22 characters
SBI-C/S
6.1.
Data output manual/automatic
(client)
6.1.1
Manual without stability
6.1.2 * Manual after stability
6.1.4
Automatic without stability
6.1.5
Automatic with stability
6.1.7
Print log for PC
6.3.
Time-dependent autom. output
6.3.1 * 1 display cycle
6.3.2
2 display cycles
6.3.4
10 display cycles
6.3.7
100 display cycles
7.2.
Output: line format
7.2.1
For raw data: 16 characters
7.2.2 * For other apps: 22 characters
xBPI
SMA
Modbus/TCP